This is the exact package issued on every residential, institutional and commercial file — nothing is an "extra," it's simply what a buildable set requires.
Room arrangement for every level of the house, matched to your plot's road-facing side, orientation and family size — drawn before anything else so later drawings simply follow it.
Fully dimensioned construction drawings your mason and contractor build directly from — wall thickness, room sizes, door and window positions all fixed on paper.
Bed, sofa, wardrobe and dining placement per room, so switchboards, AC points and curtain pelmets land in the right place the first time.
Drawn floor by floor, not marked on site after the walls are already up.
Light points, switchboards, DB location and AC/geyser points marked per floor before conduit is laid.
Supply line routing to every kitchen, bathroom and washing area, sized to your overhead or underground tank.
Waste line falls and connection points planned so nothing needs to be re-routed once the slab is cast.
Photo-style front and side elevation renders so you can see (and adjust) the facade, cladding and colour scheme before construction — not after.
Dimensioned 2D elevations for the contractor's use, alongside the working elevation sheets used for parapet height, sunshade projection and cornice detail.
Interior renders for the rooms you want to see finished before tiling and paint decisions are locked in.
Footing and foundation sizing based on the structure's actual load and floor count, not a standard depth copied from another plot.
Exact covered area per floor, needed for accurate cost estimation and for authority submission paperwork.
The full drawing set reformatted to the submission standard your development authority or housing society requires for map approval.
For clients who want the same office to build what it designed.
| Stage | What's supervised | Sign-off |
|---|---|---|
| Layout & excavation | Boundary, setback and column/wall marking against the approved layout | Site visit |
| Foundation & DPC | Footing depth, steel and concrete against foundation drawing | Site visit |
| Grey structure | Brickwork, slab casting and floor-to-floor levels per working plan | Site visit |
| Electrical & plumbing rough-in | Conduit, pipe and point positions checked against MEP drawings | Site visit |
| Finishing | Flooring, paint and fixture placement matched to interior 3D views | Final walkthrough |
Share your marla size and floor count and we'll walk you through the exact sheets your project needs.